Pages

Showing posts with label old. Show all posts
Showing posts with label old. Show all posts

Monday, March 28, 2016

Old chisel




This chisel, found during a visit to a flea market, captured my attention by the handle  shape and a short
blade.I thought it was a "butt chisel", particularly suitable for cut   hinge mortices, as well as for job in  restricted spaces or when more control is required, since the handle sits perfectly in the palm of the hand. I saw that, however, usually, these chisels have sides chamfered (bevelled edges) not square as in this case.
The chisel is long ca. 15 cm, the blade is 25mm wide. This was probably a firmer chisel ,adapted for this purpose, a hypothesis also sustained by brand position that would be less close to the edge in the case of an original butt chisel. However, given also good quality blade, marked "Kirschenwerk" (Two Cherries), I decided to try a restore for reuse it after years of dust and rust. I first separate the blade from the handle. The old ferrule was clearly ruined and I took the opportunity to change it with a  brass new one. The source was a hydraulic brass pipe from which I cut a piece of appropriate measures. I gave support to the ferrule inserting  a wooden rod into the handle. It  also serves to redo the hole for the pyramidal tang. I drilled it using decreasing diameter drill bit.

The bit diameters must be between the minimum and maximum diagonal found in the tang section. Between the blade and the ferrule I put a hydraulic seal  that will serve to absorb the shots of a mallet.
 
The blade is hardly pitted, fortunately, mainly  on the bevel side, while the back appeared to be in good conditions, so that the flattening was quick and easy. After a over night vinegar bath, a  25° bevel °has been regrinded. To maintain a vintage look I gave a coat of  "antique walnut " varnish  and finished with two coats of wax.
The result satisfied me, and certainly this chisel will still have something to add to its long history.


Read more »

Tuesday, March 22, 2016

Garden Shed Plans This Old House




Garden Shed Plans This Old House - storage shed





...Im going to reveal some EMBARRASSING strategies woodworking publishers dont need YOU to know.



Ive been exactly where you are.



I bought a shed plan... began to abide by it... got the 2x4s, the various tools, and started reducing to size even.



And then, presently there I was... STUCK. Screaming in my own head...



A Report For ESTABLISHING And CREATING A Running Exercising Planrunner Education



Runner Education



Training is surely an critical facet of being truly a runner. Whether youre a newbie and that you will be searching to boost your stamina or you have already been operating for an although and wish to operate quicker or teach for an event like a marathon, training is one thing thats an crucial section of your sport.



Theres a skill to deciding on a good schooling method. The program you decide on will depend on your plans plus your wants. Heres some assistance which could enable you to stumbled upon a runner training program that will operate to meet your requirements.



Decide by yourself Plans



Step one to deciding on a runner instruction method would be to decide on your own objectives usually. If you are a beginner, your training software can look a whole lot unique of somebody whos running their 3rd marathon.



Sometimes an purpose will be personal this sort of just like a motivation to use five miles devoid of stopping to rest. Some other instances a target will likely be centered on an occasion this sort of as working a 10K or perhaps a marathon. And typically, individuals will operate to greatly help them drop weight or even to construct up their at all times state of wellness.



Once you choose your goals, write them lower and place them inside locations wherever you may see them frequently. Turn the target statements into affirmations and recite them several instances every day. For example, if you want to utilize operating to work with you lose 10 kilos, your affirmation may be: "Running is helping me lose 10 pounds."



Choose a Plan



Dependent on your set of targets, youre prepared to select or develop a runner coaching program that will do the job personally. In the event you will need help, check with a person who has extra knowledge than you.



For example, if the purpose is usually to operate a marathon, youll wish to decide on a training schedule that may allow you to operate a booming competition. But, you will discover so numerous applications available that it might be difficult selecting one that is definitely befitting you. A beginning marathon runner wont abide by the same system being an person that is racing within their fifth marathon.



In general, appear for a runner training program which is slightly tough but not from your attain. You do not need to get discouraged and prevent trying then.



Stick with It



You can invest a whole large amount of time setting goals and fining an schooling software, however in case you dont stay to it, your time and efforts wont mean anything. Everyone offers various ways of selecting their enthusiasm. As soon as you locate what motivates you, keeping your teaching plan shall get easier.



A while could be taken by it to create a routine. Before a regime will be in place just, you may possibly sense disorganized or unmotivated. Give your personal a handful of days to establish a fantastic regime before starting obtaining discouraged. Frequently, the regime can make you more motivated.







If youve done any kind of project, you get just what Im talking about.



Well, heres why:



Theyre compiled by ghostwriters whove never touched a piece of lumber or a chisel within their LIFE!



They could NEVER tell if a step didnt seem sensible or not.



ONLY someone with Knowledge, building LOTS of projects -- AND teaching it to others -- could have an clue of exactly what a plan had a need to include, so...



And lets not even get into trying to “Wing it".



You and I are well aware how thatll find yourself.



Heres the deal: If youre going to invest the period, energy and money in creating a shed yourself...





...Then make sure the plan youre using has EVERYTHING you need to obtain it done in:



• The easiest...



• Most inexpensive , and...



• The fastest way achievable.



Easier in theory!



Well, hang restricted. Ive gotcha covered.



To create the kind of shed, your neighbors along with other woodworkers will secretly ENVY (while mumbling “fine job” below their breath)...



Homemade Xylophones Are Cheap And AN EASY TASK TO Make



If youre wondering steps to make a xylophone then this can help. In the end a xylophone is not any piano! Initial, remember, its simple enough to get all of the parts you will need and assemble them. Actually your homemade xylophone can look like one thats shop bought, and you also yourself may even elect to sell it for a couple grand. You dont have for you to get worried with procuring any specialty equipment. Im by no means a woodworking fanatic, Im a musician, and when I could build it carrying out a do-it-yourself guide, then Im certain so can you.



A hurdle you might encounter will undoubtedly be finding good wood, to really have the right audio. But when you have all the parts and you know very well what youre doing, you will have a home made xylophone in in regards to a week or two.



Its a lot simpler to construct a xylophone than you might think. Carrying out a good guide isnt the hard component, its locating the guide initially thats. I online spend weeks, looking for great directions, and you could scroll to underneath to start to see the resources I came across. A xylophone is considerably rare to find, despite its beauty. Because of its unpopularity, its difficult to acquire one for cheap. Which means you are ideal to desire to create a xylophone by yourself. It will soon end up being a much smarter choice, than hunting your neighborhood classifieds for deals.



It was very costly for me to get one, used or new, so I was pretty much forced to produce a wooden xylophone myself. As a total result, I have a great new experience (though not really without its hurdles) and an excellent xylophone to play. Actually the existing xylophone I very own, is a second one which I made. I construct my initial xylophone in over weekly with hardly any small mistakes just. But some money was required by me, so I marketed it for over two grand just. with the amount of money I received, I afterwards bought better wood. Now the fruit of my toils audio and looks amazing!



So how can you build a xylophone? No quick tutorial shall do the procedure justice, so you might aswell skip to underneath of this article for the DIY xylophone guideline I used. I state this, because if this is actually the first task youre undertaking of the size then you need to use a source that may supply you with a ton of photos, or even better videos that may illustrate every stage from choosing the right timber to reducing it, assembling it, and tuning it, which means that your homemade xylophone could have the audio of the expert percussion instrument.



Wood is essential, as you should make sure that it does not have any kinks always, and that parts you use are free from any defects. Provide it a detailed examination before it really is bought by you. You will find the wood you will need locally from the hardwood supplier probably. Just ask for a few of their untreated wood, and youll have the ability to address it yourself. Or mainly because a worse case situation, it is possible to always sand it lower.







I understand because Ive taught tons of people to build stunning , professional and inspiring looking sheds, that that keep you in AWE.



Not merely did I teach close friends...



... Ive taught absolute newbies , without ANY knowledge at all ...



...And they created the perfect shed THE VERY FIRST TIME.



So, I know its not a fluke.



So heres what Ive got for you:



Read more »

Wednesday, January 6, 2016

Old way for frame and panel construction


A traditional method for frame and panel construction consists in  assembling frames using mortise and tenon joints and inserting panels in grooves cut along the perimeter. the job Success heavily depends on an accurate layout and compliance with the various working stages.


For cutting grooves we will choose a plough plane blade with the same width of the chisel we will use to cut the mortises and which is consistent with the panel thickness (1).



The tenons will be cut on the rails and consequently mortises are positioned on the stiles.  Establish the length of the stiles and cut them leaving few inches at both ends. This spaces (horns) will be useful to work safely during the mortise cutting and avoid splitting problems (2).




Use the rails to mark their position on the stiles and divide the space according to the scheme shown in the picture (3).




Layout tenons on the rails  with a mortise gauge (4): the distance between their shoulders plus the  width of the stiles must correspond to final door width. Use the same mortice gauge for tracing  mortises on the stiles.



Cut mortises and tenon cheeks first (not yet shoulders) (5-6) and realize the grooves on stiles and rails (7-8).





Cut the tenon shoulders and create the haunch (9), the height of such element being equal to the groove depth.



Dry assemble to check all joints and then glue up. When the glue is dried, cut the horns and insert the door into place (in this case a frame has been added).



Read more »